LS18T PTO + E400V 18tons of Wood Splitter for PTO and with 400V Electric Motor 400V 5.1 kW

LS18T PTO + E400V 18 tons of wood splitter for PTO and with 400V electric motor 400V 5.1 kW

Specifications

• Drive either electric motor 400V (380V) V/50Hz/5,100 watts(5.1kW)/S6 40 % IP54
• or PTO connection standard 34.8 mm 6 Teeth (13/8" 6 teeth) max. 540U/min min. 25 hp
• Maximum force of 18 tons
• Spaltgutgrößen of about 55 cm in diameter , depending on the species and nature
• Spaltgutgrößen manufacturer's recommendation 110 cm length x 45 cm Ø
• Wood Length 110cm maximum/minimum 35cm
• Arbeitshubub 94.5 cm
• Speed ​​forward (fast) ca.12,0 cm/sec with about 9 tons of splitting pressure
• Speed ​​work running about 4.8 cm / sec with 18 tons Speltdruck
• Speed ​​rewind about 7.8 cm/sec
• Hydraulic oil 24 liters HLP32
• Hydraulic oil pressure both pumps 22 MPa
• Noise at idle 80.1 dbA
• Noise under full load 92.5 dbA
• Dimensions (min./max.) H x W x D in cm 188 x 66 x 70/250 x 110 x 70
• Weight about 318 kg

Shipping Dimensions: H x W x D in cm 196 x 70 x 75 approx 325kg
Specifications are subject to change at any time.
The operational readiness can be produced without any effort.
Thanks to the included support (Fig.1), the cylinder moves by its own drive to the operating position (Fig.2).
You need this there only to lock.

Thanks to the integrated master lifter a very ergonomic work is possible. Do not need the log lifter, it can be engaged and serves as the second guard.

TWO WORKING SPEEDS OF HYDRAULIC PISTON
FORWARD quickly
Press both operating lifting completely down, the piston moves with 2.5 times the speed down. He developed about ½ of the maximum splitting force.
WORK DURATION
Move just before the impact of the wedge on the wood one of the two control levers back a bit to the top (2-3 cm), the piston movement slows. Now the device develops the specified maximum splitting force.
2 speeds

Two different operating modes are selectable by the simple on or removing a spring (Fig.1):
Hooked first spring, manual rewind. the piston remains when you release the control levers are in any position and only retracts when pushing the operating lever.
Posted 2 spring with automatic rewind. When you release the control lever, the piston moves back up to the desired Strel Lung.
This position can be continuously adjusted with a handle (Fig.2). This allows you adjust the splitting stroke the length of your Spaltguts. This saves a lot of time and energy.

Other Highlights

Scope of delivery: