Atmos Gasifying boilers for wood GC XXGS 18kW to 70 kW

Please contact the office by email or telephone for a quote including delivery and availability.

Gasifying boilers for wood ​

The boilers are constructed for burning wood on the principle of generator gasifying with the use of a gas exhaust ventilator (S), which withdraws the combustion gases from the boiler, or leads air into the boiler.

The boiler body is produced as a weldment of 3 - 8 mm steel sheets. They comprise the fuel hopper, which is equipped at the bottom with a heatproof pipe fitting with longitudinal hole for the combustion gases and passage of gases. The burnout part of the multiple chamber furnace under the fuel hopper is equipped with ceramic pipe fittings. There is a vertical combustion gas duct in the back of the boiler body, which is equipped with a heating valve in the upper section. The upper part of the combustion gas duct is fitted with a gas exhaust outlet for connection to a chimney.

Adventages of Wood Gasification Boilers ATMOS

• Option to burn large pieces of wood (log wood)
• Large space for wood - long burning period
• High efficiency 81 - 91 % - primary and secondary air is preheated to a high temperature
• Ecological burning - boiler class 5 - ČSN EN 303-5, ECODESIGN 2015/1189
• Exhaust fan - ash cleaning without dust, boiler room without smoke
• Cooling loop protecting against overheating – without risk of boiler damage ​ ​
• The exhaust fan automatically switches off when the fuel burns out
• Comfortable ash removeing - large space for ash (when burning wood you have to clean it once per week)
• Boiler without tube heat exchanger - easier cleaning
• Small size and low weight
• High quality

Enviroment

Reverse combustion and a ceramic combustion chamber enable perfect combustion with minimum polluting emissions. The boilers comply with environmentally-friendly product requirements according to Guideline No. 13/2002 of the Czech Ministry of Environment. They comply the European Standard EN 303-5 and all the boilers rate in class 3, 4, 5, EKODESIGN 2015/1189.

Instalation

ATMOS boilers must be connected via the LADDOMAT 22 or ESBE thermoregulation valve to achieve keeping the minimum temperature of water returning to boiler at 65°C. The temperature of water exiting the boiler must be permanently kept between 80 - 90°C. The default configuration of all boilers includes a cooling circuit to prevent overheating. We recommend installing boilers with accumulation tanks.

Certification

All ATMOS boilers are certified in testing laboratories for the individual countries of destination: State Testing Laboratory Brno, TÜV Munich - Germany, Lithuania, Ukraine, Sweden, Poland, Austria, Slovakia, Hungary according to current standards - EN 303-5.
Protected by patent.

The boilers ATMOS Generator DC15GS, DC20GS, DC25GS, DC32GS and DC40GS are completely new types of boilers for wood. They are true LCV-generators.

DC18S, DC22S, DC25S, DC30SX, DC32S,
DC40SX, DC50S
ATMOS (Dřevoplyn) Woodgas - wood boilers

ATMOS Generator - wood boilers

View of top feeding chamber - Woodgas

View of top feeding chamber - Generator

View of bottom burning chamber - Woodgas

View of bottom burning chamber - Generator

Exhaust fan
minimises smoke during feeding and operation of the boiler

Overheating protection - cooling loop

DC 100

DC 70 S, DC 75 SE

burning of flame
in the bottom combustion chamber in spherical space

Boilers regulation

Electrical - mechanical - Power is controlled with a safety valve operated with the draught regulator, FR 124 type, which automatically opens or closes the safety valve according to a set output temperature of water (80 - 90°C). When setting the power regulator, much attention should be paid because the regulator has another important function other than power regulation - it also secures the boiler against overheating. A controlling thermostat located on the boiler panel regulates the fan according to a set temperature (75 - 85°C). A temperature lower by 5°C should be set on the controlling thermostat rather than on the FR 124 draught regulator.
The boiler runs at a reduced output even without a fan - heating is not lost when the electric power fails. At up to 70 percent of its rated output, the boiler can be operated without a ventilator.

Boiler regulation

Panel composition:

Main off switch, safety thermostat, thermometer, regulator thermostat and combustion thermostat

Electro-mechanical regulation is an optimum solution for easy management of the operation of the boiler (ventilator).

The design of the panel with standard regulation is a basic design for all produced boilers.

Panel with electronic regulation ATMOS ACD 01

Panel composition:
Main off switch, safety thermostat, fuse 6.3 A and electronic regulation ACD 01

Weather-compensated regulation is equipped with functions for managing operation of the boiler (ventilator), the pump in the boiler circuit, two heating circuits, warming of service water and management of solar heating.
The design of the panel with built-in electronic regulation ACD 01 is produced as a variant for boilers DC25S, DC32S, DC25GS.

Each boiler can be equipped at the customer's location with ATMOS ACD 01 electronic regulation for management of the entire heating system, depending on the outside and room temperatures. This regulation can also be managed by the boiler itself with a ventilator with many other functions.

ATMOS Woodgas

Size of feeding chamber

Technical data​​

LEGEND OF THE BOILER DIAGRAM

Dimensions

boiler width is 555 mm after disassembling the side hoods 

Attention! The DC15E boiler is not equipped with a ventilator!
Boilers DC70S and DC100 are equipped with a blowing ventilator.